MAXCELL ACCESSORIES: INSTALLATION KITS

MaxCell Accessories: Installation Kits

The MaxCell® Group has over twenty years of experience in installing cable in the network construction industry. Since 1999, we have developed proven installation techniques specifically designed for MaxCell. The installation kits below are cost effective, reusable, and tested to be the most efficient means for MaxCell installations.

MXCIK11 This kit is a single 2500lb swivel with an outside diameter of .875" and is designed for use in installing a single and multiple packs of our MaxCell product.

MXCIK21 This kit contains (3) 1800lb swivels with an outside diameter of .875" each and (1) 2-way chain harness. This kit is designed for installing single or multiple packs of MaxCell attached to (1) swivel and a rope, tape or cable attached to a second swivel. The 3rd swivel acts as a parent swivel that attaches the main pull line to the chain harness. This kit allows for different products to be placed simultaneously with the MaxCell product while helping to reduce the number of twists in the conduit structure.

MXCIK31CH This kit contains (4) 1800lb swivels with an outside diameter of .875" each and (1) 3-way chain harness. This kit is designed for installing single or multiple packs of MaxCell attached to (1) swivel while the 2nd or 3rd swivel can be attached to either a rope, tape and/or cable. The 4th swivel acts as a parent swivel that attaches the main pull line to the chain harness. This kit allows for the installation of a rope or 2 cables to be placed simultaneously with the MaxCell product while helping to reduce the number of twists in the conduit structure.

Applications commonly require these kits to be augmented with additional product. To support these requirements, the following kit components are also offered as stand alone parts.

  • MXCSW. . . . . . . . . . . . . . A single 1800lb swivel with an outside diameter (OD) of .875"
  • MXC2CH. . . . . . . . . . . . . A 2-way chain pulling harness
  • MXC3CH. . . . . . . . . . . . . A 3-way chain puling harness

In addition, MaxLube pulling lubricant is recommended for all installations to further reduce pulling tensions.

Ordering Information

Part NumberDescription
MXCIK11 Install kit for all products, single pack pulls
MXCIK21Install kit for all products, double pack pulls
MXCIK31CHInstall kit for all products, triple pack pulls
MXCSW 1800lb swivel, .875” OD
MXC2CH 2-Way chain harness
MXC3CH 3-Way chain harness