| 1 2 3 |
|
| Corner Blocks |
| Manufacturer: Jameson |
| Jameson corner blocks come in 60° and 90° styles, designed to evenly distribute the pressure on the cable when pulling around corners.
The 60° model offers more versatility than a standard 45° block with the majority of system designs. The steel side plates can be replaced in the field, offering considerable savings and increased options.
All... |
|
|
|
|
|
| Jameson Easy Rider™ Block |
| Manufacturer: Jameson |
| The Jameson Easy Rider™ overlash block is an economical, high strength and lightweight overlash tool. It can be snapped over a strand and cable package up to 2-1/4" in diameter.
Features
· Brass roller axle allows the rollers to “ride easily” and rotate smoothly
· High strength steel frame maintains better cable alignment
· 1-1/2... |
|
|
|
|
|
| Klein Pole Climbers |
| Manufacturer: Klein Tools |
| CN1972AR........Size adjustable 15" to 19" (381 - 483mm). Equipped with No.8210 pads. 5301-18 nylon calf straps and 5301-20 nylon ankle straps.
CN1972ARL......Size adjustable 17" to 21" (432 - 533mm). Equipped with same straps and pads as CN1972AR.
Pole Climbers only (without pads or straps)... |
|
|
|
|
|
| Lemco 45 degree and 90 degree Corner Blocks |
| Manufacturer: Lemco |
| Corner Blocks are used to guide coaxial cable around corners. The MIG welded steel frames are designed on a strong 17" radius and support the rollers on 2" center. Durable aluminum rollers are compatible with synthetic winch lines. Proper alignment of the cable to the input end of the corner block will ensure minimum friction, ease of pull-out an... |
|
|
|
|
|
| Lemco Cable Chute |
| Manufacturer: Lemco |
| The Model No. S1059 Cable Chute guides the cable from the trailer into the path of the strand. The cast aluminum shoe features a UHMW friction-free wear strip. The zinc-plated steel suspension hardware pivots freely under a three-bolt clamp (not supplied) to allow for trailerstrand misalignment. ... |
|
|
|
|
|
| Lemco Cable Puller |
| Manufacturer: Lemco |
| The PR965 Cable Puller is used to pull out cable prior to the lashing operation. The main body of the Cable Puller is a rugged one-piece aluminum casting. Two hardened steel rollers are provided to ride on either 5/16" or 1/4" strand. When pull out pressure is released, a brake automatically holds the Cable Puller in position. Pull out pressure... |
|
|
|
|
|
| Lemco Cable Straighteners |
| Manufacturer: Lemco |
| Used ahead of the lasher, the Lemco Cable Straighteners do preferred work. Manufactured of the same quality as the Cable Positioners, these tools feature smaller 1" holes for trunk cable and 1/4" or 5/16" strand, and Rock Maple liners offer miles of service. All steel parts and locking hardware are zinc plated.... |
|
|
|
|
|
| Lemco Cross-Over Bracket |
| Manufacturer: Lemco |
| Cross-Over Bracket is used to support the K468J Corner Block when it is necessary to pull a corner at a crossover clamp. It is fabricated of 3/16" structural hot-rolled channel. Two swivel snaps are attached to secure the bracket to the strand while the strand clamps are being set and tightened. (Strand clamps not included.) This unit can also be... |
|
|
|
|
|
| Lemco Dual Feeder Block |
| Manufacturer: Lemco |
| Following the hand-size design of the C-733, this block supports two 1" cables. Weighs .8 lbs.... |
|
|
|
|
|
| Lemco Econo-Block |
| Manufacturer: Lemco |
| The cable “Econo-Block” is used to support cable up to 2" diameter prior to lashing. The rubber roller of the M-1070-1R supports a cable up to 1-1/2". The larger aluminum roller of the M-1070-1 supports up to a 2" diameter cable and works well with wench lines. ... |
|
|
|
|
| 1 2 3 |