 Combining the CSM1-2 optical power meter, CSS1-MM Dual LED light source, and CSS1-SM Dual LASER source, the CKSM-2 is a cost-effective test kit designed for performing insertion loss measurements on multimode as well as single-mode fiber optic links.
The CSS1-MM and CSS1-SM sources feature Dual output, 850 /1300 nm LED or 1310/ 1550 nm LASER respectively, from a single output port. Both CSS1 models offer 2 modes of operation, continuous wave (CW) and user selectable modulated Tone. The CSS1-MM LED and CSS1-SM LASER output ports are stabilized to ensure accurate test results per current TIA/EIA requirements. An easy to read LCD display with Backlight shows emitted wavelengths [nm], tone frequency [Hz], and Low battery condition. The CSS1-MM model output port is equipped with a fixed SC connector while the CSS1-SM output port is equipped with Universal Connector Interface (UCI) base and SC adapter.
The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and features multiple test Tone detection for fiber identification. The CSM1-2 stores optical references for each calibrated wavelength. An easy to read LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone frequency [Hz], and Low battery condition. The CSM1 optical input port accepts Noyes thread-on style adapter caps. One adapter cap, 2.5 mm Universal, is included. A variety of Noyes thread-on style adapter caps (FC, SC, LS, etc.) may be ordered separately.
Weighing only 0.4 lb each, units are compact and convenient for field use. The CSS1-MM Dual LED light source, CSS1-SM Dual LASER source, and CSM1-2 optical power meter are fully N.I.S.T. traceable.
Features:
• Palm-sized, rugged, lightweight
• Certify multimode fiber links per TIA/EIA standards
• CW and modulated Tone
• 270, 330, 1000, and 2000 Hz supported Tone
• Power measurements in dBm or µW; insertion loss in dB
• Reference power level storage
• Large LCD with Backlight
• AA alkaline, optional NiMH or NiCd
• Automatic power-off function
• Battery Gauge
• Free 50 µm and 62.5 µm mandrels
• Cost-effective, easy to use
• N.I.S.T traceable |
| |
| Manufacturer.....................: |
 |
 |
|
|
|
|
|
| Specification Data Sheet....: |
Click Here |
|
|
| |
Ordering Information |
| Part Number | Description |
| CKSM-2 | CSS1-MM Dual LED source, CSS1-SM Dual Laser source, CSM1-2 optical power meter, AA batteries, 2.5 mm universal adapter cap, UCI-SC connector, 50 and 62.5 µm mandrels, user’s guide, and carry case |
|
|
| |
|
|
| |
|
|
|
| |
|