HUBBELL POWER SYSTEMS 6346 NO-WRENCH SCREW ANCHOR 6IN X 3/4IN X 66IN

Hubbell Power Systems 6346 No-Wrench Screw Anchor 6in x 3/4in x 66in

The Hubbell Power Systems 6346 No-Wrench Screw has a 6in anchor and is 3/4in wide by 66in high. 

The No-Wrench Screw Anchors may be installed by hand or machine. The Tripleye eye on the rod has a large opening to use a turning bar for screwing the anchor down. The eye will also fit into an adapter available from most hole-boring machine manufacturers so the anchor may be power-installed.

The No-Wrench Screw Anchor consists of a drop-forged steel eye rod welded to a steel helix. The entire anchor is hot-dip galvanized for long resistance to rust.

Holding Capacity:

  • Class 5: 6500
  • Class 6: 5000
  • Class 7: 2500