GALVANIZED RIGID FACTORY ELBOWS

Galvanized Rigid Factory Elbows• Dimensional data is for reference only
• NPT thread with end-cap on each end
• Available in GRC, Aluminum, PVC Coated and Stainless Steel
• Galvanized Rigid Elbows meet UL6 and ANSI C80.1
• Aluminum Rigid Elbows meet UL6A and ANSI C80.5
• Stainless Steel Rigid Elbows meet UL6A

UL Listed.

See PDF for 45° Elbows table.

See Ordering Matrix to configure Part Numbers.

Ordering Information

TypeDescriptionWeight EachBox QtyABTCut Length
90° Elbows1/2” X 90°1.0504.06.9 2.912.0
90° Elbows1” X 90°2.1255.88.73.015.0
90° Elbows1-1/2” X 90°4.8158.311.93.620.3
90° Elbows2” X 90°7.3109.513.8v23.4
90° Elbows3” X 90°21.33513.018.85.832.0
90° Elbows5” X 90°70.0bulk24.035.211.260.0
90° Elbows6” X 90°111.8bulk30.042.612.672.3
90° Elbows3/4” X 90° 1.3504.57.42.912.9
90° Elbows1-1/4” X 90° 3.4207.310.63.318.0
90° Elbows3-1/2” X 90°27.03515.021.86.837.0
90° Elbows2-1/2” X 90°13.9 5010.515.8 5.327.0
90° Elbows4” X 90° 36.83516.023.17.139.3

Dimensions listed in inches unless otherwise noted.