| 1 2 3 4 5 6 7 8 |
|
| Angle Suspension Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Angle Suspension Clamps have curved ends to prevent damage to the messenger strand when turning small angles. All clamps firmly grip 1/4" to 7/16" diameter strand. They are furnished with two track bolts and a center mounting hole.... |
|
|
|
|
|
| B-Beam Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
The Joslyn J25911 B Beam Clamp is used in conjunction with a 5/8" thimbleye bolt in the application of deadending strand to I beams. A clamping screw allows the clamp to be positioned on the beam flange.
... |
|
|
|
|
|
| B-Strand, Ground Clamp |
| Manufacturer: MacLean Power Systems |
| Joslyn J7956 Clamps are used to bond the cable sheath to the messenger strand. The Clamp body is made of 1-1/2" x 3/16" steel with an inside keeper riding on the end of the bolt. The 1/2" bolt can be removed to place the clamp over the messenger wire.... |
|
|
|
|
|
| Bronze, Bonding Clamps |
| Manufacturer: Marathon |
| Marathon “K” Series Bonding Clamps are used to bond 1/4” and 5/16” galvanized strand to #6AWG copper ground wire.
• MARK1 Bonding Clamp is a plated bronze clamp with plating removed from one groove of clamp for steel strand to copper or copper bonded steel wire applications.
• MARK2 Bonding Clamp is bronze plated on either groove for aluminum... |
|
|
|
|
|
| C Cable Lasher |
| Manufacturer: GMP |
| The C Cable Lasher is used to lash small diameter aerial cables to supporting strand with stainless steel lashing wire. It is used primarily for new installations.
Features
· Will lash any single or multiple cables up to 1 5/8" (40 mm) dia. onto bare 1/4" to 3/8" strand.
· All the same high quality features as the J2 Cable Lasher; those fea... |
|
|
|
|
|
| Cable Extension Arm |
| Manufacturer: MacLean Power Systems |
| These Cable Extension Arms are used to support a cable at a distance from the pole.
The messenger cable is held by a standard J1096 suspension clamp which is bolted up against the underside of the two angles by a 5/8" machine bolt. This machine bolt is fitted between the legs of the two angles and can be adjusted for proper extension from the pole... |
|
|
|
|
|
| Cable Suspension Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Joslyn Cable Suspension Clamps are used with through bolts, which serve as a clamping member, and are shaped to securely grip messenger wire to the pole. A nut and square washer is used between the clamp and the pole to provide proper spacing. The J1095 is used for light cables and consists of the clamping members only. A 5/8"... |
|
|
|
|
|
| CADWELD® PLUS ONE SHOT |
| Manufacturer: Erico |
| The CADWELD® PLUS ONE SHOT produces a pemanent exothermic connection to a ground rod that will not loosen, corrode or increase in resistance for the life of the installation. The convenient single-use package makes the connection to the ground rod without a mold or starting material. Thanks to the electronic CADWELD PLUS Control Unit, welds can n... |
|
|
|
|
|
| CADWELD® PLUS System |
| Manufacturer: Erico |
| The ultimate welded connection that will never loosen, corrode or increase in resistance just got BETTER.
CADWELD® PLUS is the latest advancement in the continuing evolution of ERICO's exothermic products. It is a simplified method of performing exothermically welded electrical connections.
Features:
The CADWELD PLUS System offers all the b... |
|
|
|
|
|
| Carriage Bolt |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Joslyn carriage bolts are roll threaded with square shoulder and square nut. Manufactured in accordance with ANSI standards.... |
|
|
|
|
| 1 2 3 4 5 6 7 8 |