|
| Angle Suspension Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Angle Suspension Clamps have curved ends to prevent damage to the messenger strand when turning small angles. All clamps firmly grip 1/4" to 7/16" diameter strand. They are furnished with two track bolts and a center mounting hole.... |
|
|
|
|
|
| B-Beam Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
The Joslyn J25911 B Beam Clamp is used in conjunction with a 5/8" thimbleye bolt in the application of deadending strand to I beams. A clamping screw allows the clamp to be positioned on the beam flange.
... |
|
|
|
|
|
| B-Strand, Ground Clamp |
| Manufacturer: MacLean Power Systems |
| Joslyn J7956 Clamps are used to bond the cable sheath to the messenger strand. The Clamp body is made of 1-1/2" x 3/16" steel with an inside keeper riding on the end of the bolt. The 1/2" bolt can be removed to place the clamp over the messenger wire.... |
|
|
|
|
|
| Bronze, Bonding Clamps |
| Manufacturer: Marathon |
| Marathon “K” Series Bonding Clamps are used to bond 1/4” and 5/16” galvanized strand to #6AWG copper ground wire.
• MARK1 Bonding Clamp is a plated bronze clamp with plating removed from one groove of clamp for steel strand to copper or copper bonded steel wire applications.
• MARK2 Bonding Clamp is bronze plated on either groove for aluminum... |
|
|
|
|
|
| Cable Suspension Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Joslyn Cable Suspension Clamps are used with through bolts, which serve as a clamping member, and are shaped to securely grip messenger wire to the pole. A nut and square washer is used between the clamp and the pole to provide proper spacing. The J1095 is used for light cables and consists of the clamping members only. A 5/8"... |
|
|
|
|
|
| Crossover Clamps |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Joslyn Crossover Clamps for CATV or Telephone Cables are used to clamp two messengers where they cross at right angles. The J7930 Drop Forged Clamp sections are 1-1/2" wide and 3-1/4" long. Two 1/2" diameter bolts have oval shoulders to prevent turning when tightening. The J25564 Clamps are 1-1/2" wide and 3-1/2" long. Two 3... |
|
|
|
|
|
| Guy Clamp |
| Manufacturer: MacLean Power Systems |
| Hot Dip Galvanized
Joslyn Guy Clamps are rolled from carbon steel with straight parallel grooves that will not damage guy strand. Offset guy clamps are designed to give increased holding strength. The clamping bolts have special shoulders to prevent turning when the nuts are tightened.
... |
|
|
|
|
|
| Marathon Split Bolt Connectors |
| Manufacturer: Marathon |
| Marathon Split Bolts are used to make bonding connections between two copper ground wires. The bolt and nut are formed from high-strength corrosion resistant C210 copper. Marathon Split Bolts have a specially designed pressure bar which provides high pull out strength. Tested and UL listed to UL486A requirements.
... |
|
|
|
|