| Search Within Results ... |
|
|
| |
|
| HOME : PRODUCT CATALOG : FIBER OPTICS : CONSUMABLES : FUSION SPLICING |
Corning Fusion Splice Protection |
| EMAIL SALES ABOUT THIS PRODUCT |
|
|
 An Evolant™ Solutions Product
Corning Cable Systems offers a variety of splice protection choices to meet your needs. All the types of protection pictured and described here allow individual fiber access in the splice tray. Corning Cable Systems offers heat-shrink protection in both single-fiber and multifiber versions.
Heat-Shrink Single- or Multifiber Splice Protector
Heat-shrinkable splice protection continues to be the most popular method to protect fusion splices. The sleeve securely protects the fusion splice on either 250 or 900 µm coated fibers, while offering individual access to each fusion splice. To use, slide the heat-shrink sleeve over the fiber and then make the splice. Reposition the heat-shrink sleeve directly over the splice and place it in the heat-shrink oven. After the specified heating time (depending on sleeve type), the splice is secure and ready to be transferred to the splice tray. Corning Cable Systems heat-shrink sleeves are compatible with most splice trays offered and are compatible with all heat-shrink ovens offered with Corning Cable Systems fusion splicers. Corning Cable Systems offers both single-fiber and multifiber heat-shrink sleeves.
Splice Pak™ Single-Fiber Splice Protector
The Splice Pak Splice Protector is a cost-effective alternative to the heat-shrink protective sleeve. It is a plastic “clam-shell” design with an adhesive applied to the inside surface. The Splice Pak Protector requires no power for assembly, thus extending the battery life of the fusion splicer. The Splice Pak Protector is offered in three types for different fiber diameters combinations. To use, simply insert the Splice Pak Protector into the crimp device, then transfer the completed splice into the device and crimp.
Crimp & Go® Single-Fiber Splice Protector
The Crimp & Go Splice Protector encloses the splice within an aluminum sleeve sealed with an elastic material. Like the Splice Pak Splice Protector, the Crimp & Go Protector requires no power for assembly, thus extending the battery life of the fusion splicer. To use, insert the Crimp & Go Protector into the crimp device, then transfer the completed splice into the device and crimp. |
| |
| Manufacturer.....................: |
 |
 |
|
|
|
| Product Detail.....................: |
Part Number Description
· 2806031-01 Heat-Shrink Fusion Splice Protector Parts, single-fiber (package of 50; 60 mm long)
· 2806032-01 Heat-Shrink Fusion Splice Protector Parts, single-fiber (package of 50; 40 mm long)
· 2806031-04 Heat-Shrink Mass Splice Protector Parts, 2- or 4-fiber ribbon (package of 25; 40 mm long)
· 2806031-012 Heat-Shrink Mass Splice Protector Parts, 6- or 12-fiber ribbon (package of 25; 40 mm long)
· FSA-012 Crimp & Go Splice Protector Parts (package of 150)
· A0276859 Splice Pak Protector, yellow, 250/250 µm (package of 25)
· A0295149 Splice Pak Protector, blue, 250/900 µm (package of 25)
· A0295150 Splice Pak Protector, green, 900/900 µm (package of 25) |
|
|
|
|
| |
| |
|
|
| |
|
|
|
| |
|
|
|