| 1 2 3 |
|
| Corning Gilbert "F" Series Connectors |
| Manufacturer: Corning Gilbert |
| “F” connectors allow a coaxial cable to maintain a 75-ohm impedance. They are used with 59, 6, 7 and 11 cable series. Use of “F” connectors helps avoid impedance problems with interfaces and splices.
· 59 and 6 “F” connectors are available in a convenient feed-through design.
· 7 and 11 connectors have an internal pin contact that mate to female ... |
|
|
|
|
|
| Corning Gilbert "F" Series Terminators and Accessories |
| Manufacturer: Corning Gilbert |
| Our “F” series terminators are passive electronic circuitry designed to block 60 cycle and terminate RF signals on unused equipment ports. They are necessary to prevent impedance mismatches and minimize RF reflections and echoes. Unused active ports on trunk or feeder equipment should have a terminator installed. We offer a wide variety of terminat... |
|
|
|
|
|
| Corning Gilbert 180° Degree Adapters |
| Manufacturer: Corning Gilbert |
| See PDF for ordering information and product specifications on 180° Seizure Screw, 180° Seizure Screw Swivel and 180° Socket Contacts. ... |
|
|
|
|
|
| Corning Gilbert 90° Seizure Screw Adaptors |
| Manufacturer: Corning Gilbert |
| Trunk and Distribution Adapters
Adapters are essential components to configure equipment for aerial and underground applications and are used to change the direction of the cable where space is limited or where tight bends are required. Our adapters allow room to economize the enclosures installed on municipal and customer properties. They elimi... |
|
|
|
|
|
| Corning Gilbert 90° Socket Contact Adapters |
| Manufacturer: Corning Gilbert |
| Socket Contact Adapters
· Beryllium copper socket contact design accepts pin diameter from .065 to .075 in. [1.65 to 1.90 mm].
· Bright acid tin plated brass pin.
· AC power rating: 15 amps continuous.
· Return loss: >30 db to 1 GHz.
· KS male and KS female ports meet SCTE interface practice standards.
· Body manufactured from ASTM 6262 alumi... |
|
|
|
|
|
| Corning Gilbert Bonding Blocks and F-81 Drop Products |
| Manufacturer: Corning Gilbert |
| Corning Gilbert’s next generation of high frequency drop products are designed for the highest electrical performance while maintaining excellent extended reliability.
The cylindrical contact design has four points of contact, not the two found in most high performance products. Contacts are manufactured from BeCu to insure reusability while mai... |
|
|
|
|
|
| Corning Gilbert F Series Accessories |
| Manufacturer: Corning Gilbert |
| When installed on a standard “F” female port, (ANSI/SCTE-IPS-SP-400-1996), this product gives a weather resistant seal with any UltraSeal or Gilbert 360 series connector.... |
|
|
|
|
|
| Corning Gilbert Female F Splice |
| Manufacturer: Corning Gilbert |
| See PDF for ordering information and specifications on:
Female Splice
Female Chassis
Male Chassis
F Male to F Male Splice
90 F Adaptor
F Push-on Adaptor
Security Shield Tool
Security Shield... |
|
|
|
|
|
| Corning Gilbert G2 AFM Connectors |
| Manufacturer: Corning Gilbert |
| G2 series 2-piece trunk and distribution connectors provide superior performance, while eliminating the common disadvantages of traditional 2-piece designs.
· Provides installers a full view of the cable’s center conductor insertion into the connector seizing mechanism (no blind entry)
· Incorporates a patented support sleeve located in the b... |
|
|
|
|
|
| Corning Gilbert G2 BAFF Connectors |
| Manufacturer: Corning Gilbert |
| G2 series 2-piece trunk and distribution connectors provide superior performance, while eliminating the common disadvantages of traditional 2-piece designs.
· Provides installers a full view of the cable’s center conductor insertion into the connector seizing mechanism (no blind entry)
· Incorporates a patented support sleeve located in the b... |
|
|
|
|
| 1 2 3 |