| Search Within Results ... |
|
|
| |
|
| HOME : PRODUCT CATALOG : CONDUIT & INNERDUCT : SPLIT DUCT |
Split Duct |
| EMAIL SALES ABOUT THIS PRODUCT |
|
|
 Split Duct is the fast and easy way to repair broken ductwork without the costly cutting and resplicing of your conductors.
The unique tongue-and-groove design provides a strong, rigid solution for duct repair situations.
The interlocking design allows the split duct sections to be staggered and butted together. Joints may be sealed with tape and reinforced with plastic or metallic straps to produce a rigid, stable unit.
Manufactured from a compound designed specifically for power and telecommunications applications. Split Duct exhibits superior impact strength and ultraviolet resistance.
Available in 2” through 6” diameters, this product line also contains couplings and sweeps necessary to complete the system.
Recommended Installation Procedure
1. Place one 10-foot Split Duct section under cable.
2. In order to stagger joints, saw another section in half (about 5 feet long).
3. Place 5-foot section over cable and snap the two sections together.
4. Place strap about one foot from the end and another strap about a foot from the joint where the ends of the top sections will butt.
5. Place another 10-foot Split Duct section over the open half of the bottom section, butt the ends tightly together and snap the sections together.
6. Place a length of tape around both sections of the Split Duct to cover the butted joint.
7. Place a strap about one foot beyond the taped joint.
8. Lay another length of Split Duct underneath cable, butt together, tape the butted joint and strap one foot on each side of the joint.
9. Repeat procedure.
See Order Matrix to configure Part Numbers |
| |
| Manufacturer.....................: |
 |
 |
|
|
|
|
|
| Specification Data Sheet....: |
Click Here |
|
|
| |
Ordering Information |
| Type | Description | Std. Ctn. Qty. | Std. Ctn. Wt. (lbs) | O.D. |
| Schedule 40 | 2” Schedule 40 Split Duct
| 700 | 564 | 2.375 |
| Schedule 40 | 2-1/2” Schedule 40 Split Duct | 460 | 572 | 2.875 |
| Schedule 40 | 3” Schedule 40 Split Duct | 500 | 857 | 3.500 |
| Schedule 40 | 3-1/2” Schedule 40 Split Duct | 290 | 569 | 4.000 |
| Schedule 40 | 4” Schedule 40 Split Duct | 290 | 701 | 4.500 |
| Schedule 40 | 5” Schedule 40 Split Duct | 230 | 751 | 5.563 |
| Schedule 40 | 6” Schedule 40 Split Duct | 130 | 548 | 6.625 |
| Schedule 80 | 2” Schedule 80 Split Duct | 700 | 749 | 2.375 |
| Schedule 80 | 4” Schedule 80 Split Duct | 290 | 922 | 4.500 |
| C Duct | 4” C Duct Split Duct | 320 | 614 | 4.350 |
|
|
| |
|
|
| |
|
|
|
| |
|
|
|