| 1 2 |
|
| AFL Aerial Drop Cable |
| Manufacturer: AFL |
| Features
• Designed for use with inexpensive attachment hardware
• Compatible with standard splice closures
• Self-supporting
• Small cross section for maximum density in closures and conduit
Mechanical Data
* Longer lengths may be available upon request.
Aerial Drop Cable
Aerial Drop Cable is specifically designed for Fiber... |
|
|
|
| AFL CT-30 Series Fiber Cleavers |
| Manufacturer: AFL |
| The CT-30 Cleaver sets the standard for portability, reliability and ease of use. Available for either single fiber or ribbon splicing (up to 12 fiber ribbons) applications, the CT-30 Cleavers are compatible with all AFL Telecommunications fusion splicers. Designed for excellent portability, the CT-30 is equally at home in a splicing van or in a bu... |
|
|
|
| AFL Drop Cable |
| Manufacturer: AFL |
| Indoor/Outdoor Riser Tight Buffered Cable
Indoor/Outdoor Tight Buffered cables are speci.ed for campus network cabling etween buildings where interbuilding lengths are short enough that the installer can recognize savings from the lower costs of terminating tight buffered cables. For indoor applications the cable is OFNR listed. For outdoor appli... |
|
|
|
| AFL Hot Jacket Strippers |
| Manufacturer: AFL |
| The HJS-02 and HJS-03-24 Hot Jacket Strippers provide superior ribbon and field ribbonized stripping performance. They conserve power for field stripping when operating under battery power. A temperature selection switch is also provided for easy optimization in the field for different fibers or operating conditions. An optional single-fiber adapte... |
|
|
|
| Ethernet Concentrator |
| Manufacturer: AFL |
| AFL’s 24-Port Ethernet Concentrator is the ideal way to extend fiber connections from a Gigabit Ethernet fiber backbone to the home, business, or desktop. Each downstream port provides up to 100Mb full-duplex service over a single optical fiber while two Gigabit uplink ports can be provided in single-mode, multimode, or UTP configurations. The FN... |
|
|
|
| FPB-201 Fiber Demarcation Box |
| Manufacturer: AFL |
| AFL has designed a cost effective solution for a protecting the passive demarcation of premise fibers. The FPB-201 is injection molded with an integral fiber retention system allowing for quick installation and a positive lock strain relief for most premise fiber cable. This device allows for the indoor and protected outdoors interconnect of up to ... |
|
|
|
| FSM-60S Fusion Splicer |
| Manufacturer: AFL |
| The FSM-60S Fusion Splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30” drop test.
... |
|
|
|
| Fusion Splicer FSM-18R |
| Manufacturer: AFL |
| The FSM-18R Fusion Splicer is a 4-fiber ribbon splicer with similar versatility and robust nature of the Fujikura 12-fiber ribbon splicer. Well-suited for FTTx or LAN applications, the FSM-18R fusion splicer can splice up to 4 fibers, as well as, single fibers. The enhanced robust features provide resistance to shock, dust, and rain to minimize dow... |
|
|
|
| Fusion Splicer FSM-18S |
| Manufacturer: AFL |
| The FSM-18S Fusion Splicer is a low cost, fixed V-groove, single fiber fusion splicer with the same robust features offered in other high end models. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and withstands a 30” drop test.
New features such as automatic tube heater operation, user-selectable clam... |
|
|
|
| Fusion Splicer FSM-60R12 |
| Manufacturer: AFL |
| The FSM-60R12 Fusion Splicer offers unmatched versatility and reliability. The new ribbon splicer withstands a drop test of up to 30” and continues to splice. And enhanced, robust features enable the FSM-60R12 to resist shock, dust, and rain so that unfortunate environmental conditions do not negatively impact productivity.
Equipped with a user... |
|
|
|
| GE-PON Gigabit Ethernet PON Solution |
| Manufacturer: AFL |
| Proven PON Technology for Ethernet in the “First Mile.”
Fujikura’s FNP4101 Gigabit Ethernet PON solution offers full compliance with the IEEE 802.3ah PON standard while retaining the scalability and switched-Ethernet operating features of Fujikura’s widely-deployed FNP2101 platform.
The 1RU Optical Line Terminal (OLT) has four PON ports tha... |
|
|
|
|
|
| LG-250 Sealed Fiber Optic Splice Closure |
| Manufacturer: AFL |
| The LG-250 is a sealed dome closure designed for medium count fiber splicing (< 96 single or 288 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required. Ideal for express or ring applications. The LG-250 requires no tools for re-entry.
Features:
• Supports loose tube, core tube, diele... |
|
|
|
| LG-350 Sealed Fiber Optic Splice Closure |
| Manufacturer: AFL |
| The LG-350 is a sealed dome closure designed for large count fiber splicing (<384 single or 1152 mass) in a butt configuration. Utilized in aerial or underground environments where a sealed closure is required. Ideal for express, ring or long haul applications. The LG-350 requires no tools for re-entry.
Features:
• Supports loose tube, cor... |
|
|
|
| LightLink™ Customer Premise System CPS-24 Interconnect Enclosure |
| Manufacturer: AFL |
| The CPS-24 enclosure provides a compact convergence point for interconnecting and splicing in wall mount applications while offering ample space for fiber management. The enclosure is provisioned for up to four LGX® compatible adapter panels or optical modules, and optional 24 and 48 fiber splice tray kits. Robust steel construction ensures the hig... |
|
|
|
| LightLink™ LANSystem™ 1RU Fiber Termination Patch/Splice Panel |
| Manufacturer: AFL |
| The AFL Telecommunications’ 1RU Fiber Termination Patch/Splice Panel is designed for use as a rack mount interconnect point where termination and connectivity of up to 36 fibers is desired. The panel design is based on a 1 rack unit height and is provisioned with three LGX 118 compatible mounting positions that can accommodate adapter plates, XFM o... |
|
|
|
| M200 OTDR |
| Manufacturer: AFL |
| The Noyes M200 OTDR from AFL Telecommunications offers unmatched fiber optic cable test and trouble-shooting capabilities in a hand-held package weighing less than 1 kg (2 lbs). Three models are offered – the M200-MM (850/1300 nm multimode) and M200-Quad (850/1300 nm multimode plus 1310/1550 nm single-mode), which are ideal for Tier-2 certification... |
|
|
|
| OFL 280 Handheld FTTx OTDR |
| Manufacturer: AFL |
| The Noyes OFL 280 from AFL Telecommunications is a single-mode OTDR offered in two FTTx-optimized models. The ‘installation and repair’ model can operate at three wavelengths (1310/1550/1625 nm) on dark fibers but automatically switches to a filtered, 1625 nm only mode if a live fiber is detected. In addition, the test port is equipped with a PON p... |
|
|
|
| One-Click Cleaner |
| Manufacturer: AFL |
| With Innovative Push-to-Clean Design
The One-Click Cleaner is an easy-to-use option for cleaning connectors in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated ... |
|
|
|
| Optical Splitter Shelf |
| Manufacturer: AFL |
| The LightLink™ LanSystem™ Optical Splitter Shelf provides a convenient in-rack solution to combine/split optical signals in a passive optical network. The shelf is comprised of a Planar Lightwave Circuit allowing a signal to be split into 32 channels in a 1U rack-mountable housing. The 2x32 option provides a filter WDM concatenated to a Planar Ligh... |
|
|
| 1 2 |